What does U0022 mean?
U0022 stands for Low Speed CAN Communication Bus (+) Low. Two or more of the car's computer modules are not communicating properly over the vehicle network (CAN bus).
Network codes cover the communication between the car's computer modules. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Low or weak battery
- Damaged network wiring or connector
- A module that has lost power or failed
- Aftermarket accessories interfering with the network
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does U0022 mean?
U0022 means “Low Speed CAN Communication Bus (+) Low”. It belongs to the network communication group: Two or more of the car's computer modules are not communicating properly over the vehicle network (CAN bus).
Is it safe to drive with U0022?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear U0022?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- U0018Medium Speed CAN Communication Bus () shorted to Bus (+)
- U0019Low Speed CAN Communication Bus
- U0020Low Speed CAN Communication Bus Performance
- U0021Low Speed CAN Communication Bus (+) Open
- U0023Low Speed CAN Communication Bus (+) High
- U0024Low Speed CAN Communication Bus () Open
- U0025Low Speed CAN Communication Bus () Low
- U0026Low Speed CAN Communication Bus () High
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.