OBD2 Car ScannerWhat does P2718 mean?
P2718 stands for Pressure Control Solenoid D Control Circuit/Open. The transmission control system has found a problem. You may notice harsh, late or missing gear changes.
Powertrain codes cover the engine, transmission and emissions. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Low or old transmission fluid
- Faulty shift solenoid
- Faulty transmission speed or temperature sensor
- Damaged wiring
- Internal transmission wear
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does P2718 mean?
P2718 means “Pressure Control Solenoid D Control Circuit/Open”. It belongs to the transmission group: The transmission control system has found a problem. You may notice harsh, late or missing gear changes.
Is it safe to drive with P2718?
Avoid driving long distances. This kind of fault can cause damage or affect safety, so get it checked as soon as possible.
How do I clear P2718?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- P2714Pressure Control Solenoid D Performance/Stuck Off
- P2715Pressure Control Solenoid D Stuck On
- P2716Pressure Control Solenoid D Electrical
- P2717Pressure Control Solenoid D Intermittent
- P2719Pressure Control Solenoid D Control Circuit Range/Performance
- P2720Pressure Control Solenoid D Control Circuit Low
- P2721Pressure Control Solenoid D Control Circuit High
- P2722Pressure Control Solenoid E
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.