OBD2 Car ScannerWhat does P0733 mean?
P0733 stands for Gear 3 Incorrect ratio. The transmission control system has found a problem. You may notice harsh, late or missing gear changes.
Powertrain codes cover the engine, transmission and emissions. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Low or old transmission fluid
- Faulty shift solenoid
- Faulty transmission speed or temperature sensor
- Damaged wiring
- Internal transmission wear
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does P0733 mean?
P0733 means “Gear 3 Incorrect ratio”. It belongs to the transmission group: The transmission control system has found a problem. You may notice harsh, late or missing gear changes.
Is it safe to drive with P0733?
Avoid driving long distances. This kind of fault can cause damage or affect safety, so get it checked as soon as possible.
How do I clear P0733?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- P072FStuck in Gear 4
- P0730Incorrect Gear Ratio
- P0731Gear I Incorrect ratio
- P0732Gear 2 Incorrect ratio
- P0734Gear 4 Incorrect ratio
- P0735Gear 5 Incorrect ratio
- P0736Reverse incorrect gear ratio
- P0737TCM Engine Speed Output Circuit
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.