OBD2 Car ScannerWhat does P0566 mean?
P0566 stands for Cruise Control Off Signal Malfunction. The engine computer has found a problem with vehicle speed signals, idle control or another sensor input.
Powertrain codes cover the engine, transmission and emissions. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Faulty vehicle speed sensor
- Dirty throttle body or idle air control valve
- Faulty switch or sensor
- Damaged wiring or connector
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does P0566 mean?
P0566 means “Cruise Control Off Signal Malfunction”. It belongs to the speed, idle control and inputs group: The engine computer has found a problem with vehicle speed signals, idle control or another sensor input.
Is it safe to drive with P0566?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear P0566?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- P0562System Voltage Low
- P0563System Voltage High
- P0564Cruise Control Multi-Function Input A Circuit
- P0565Cruise Control On Signal Malfunction
- P0567Cruise Control Resume Signal Malfunction
- P0568Cruise Control Set Signal Malfunction
- P0569Cruise Control Coast Signal Malfunction
- P056ACruise Control Increase Distance Signal
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.