OBD2 Car ScannerWhat does P037D mean?
P037D stands for Glow Plug Sense Circuit. The engine computer has detected an ignition problem or a misfire, meaning one or more cylinders are not burning fuel properly.
Powertrain codes cover the engine, transmission and emissions. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Worn spark plugs
- Faulty ignition coil or plug wires
- Clogged fuel injector
- Vacuum leak
- Low compression
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does P037D mean?
P037D means “Glow Plug Sense Circuit”. It belongs to the ignition system or misfire group: The engine computer has detected an ignition problem or a misfire, meaning one or more cylinders are not burning fuel properly.
Is it safe to drive with P037D?
Avoid driving long distances. This kind of fault can cause damage or affect safety, so get it checked as soon as possible.
How do I clear P037D?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- P0376Timing Reference High Resolution Signal B Too Many Pulses
- P0377Timing Reference High Resolution Signal B Too Few Pulses
- P0378Timing Reference High Resolution Signal B Intermittent/Erratic Pulses
- P0379Timing Reference High Resolution Signal B No Pulses
- P037EGlow Plug Sense Circuit Low
- P037FGlow Plug Sense Circuit High
- P0380Glow Plug/Heater Circuit A
- P0381Glow Plug/Heater Indicator Circuit Malfunction
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.