OBD2 Car ScannerWhat does B1923 mean?
B1923 stands for Air Bag Memory Clear Circuit Short To Ground. A body control module has found a fault in a comfort or safety system such as airbags, lights, doors, seats or climate control.
Body codes cover the airbags, seats, lights, doors and comfort systems. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Damaged wiring or a loose connector (often under seats)
- Faulty switch, sensor or motor
- Low battery voltage
- Faulty body control module
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does B1923 mean?
B1923 means “Air Bag Memory Clear Circuit Short To Ground”. It belongs to the body system group: A body control module has found a fault in a comfort or safety system such as airbags, lights, doors, seats or climate control.
Is it safe to drive with B1923?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear B1923?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- B1919Air Bag Memory Clear Circuit Short To Battery
- B1920Air Bag Passenger Circuit Failure
- B1921Air Bag Diagnostic Monitor Ground Circuit Open
- B1922Air Bag Safing Sensor Output Circuit Short To Battery
- B1924Air Bag Internal Diagnostic Monitor Fault or System Disarm Fault
- B1925Air Bag Passenger Circuit Short To Battery
- B1926Air Bag Passenger Pressure Switch Circuit Failure
- B1927Passenger Side Airbag Fault
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.